1·Rotate knob to full open position.
将旋钮旋转到全开位置。
2·It takes six minutes to move from full open to full closed.
从全开到全关只需六分钟。
3·Two switches will automatically be set to indicate full open and full closed positions.
将自动设置两个开关来指示全开和全闭位置。
4·After the gasoline engine is started, push the damper strangler to the full open position.
汽油机起动后，将阻风门打至全开位置。
5·Rotate handwheel from full OPEN to full SHUT positions several times to assure proper operation.
将手轮从全开到全闭反复旋转几次，确保操作灵活自如。
6·Visually inspect vent to ensure that vent goes to full open position when the pressure is at zero.
目测检查排气口以确保当压力为零时，排气处于全开位置。
7·It is not necessary to open this valve to the full open position to provide full flow to the process.
必须把阀门开到完全开启的位置，以提供完全的流通。
8·Discharging valves of nacl storage tank shall be full open; inlet and outlet of raw water pump full open;
检查氯化钠储槽出料阀门全开，原水泵进出口阀门全开；
9·Before reassembling cover to gear operator, make sure disc is approximately 30 degrees away from full open position.
在把盖子重新安装在齿轮执行机构上之前，确认阀瓣位于全开位置处30度的地方。
10·The full open position in straight pattern globe valves has higher differential pressure (pressure losses) than an oblique pattern valve.
与倾斜式结构相比，直线式结构截止阀在全开位置具有更高的压差(压力损失)。